19.66.040 Fences, walls, and hedges for mixed-use and industrial zones.
A. Fences within the Street Setback.
1. Fences within the street setback area are subject to applicable block frontage standards in AMC Chapter 19.61, Block Frontage Standards.
2. Supplemental Street Setback Standards. Fences less than 10 feet from a property line are limited to 42 inches in height. Exceptions:
a. Day care uses are allowed fences up to 54 inches tall in this area, provided the portion of the fence above 42 inches is at least 30 percent transparent.
b. Within the industrial zones, this provision only applies to sites across the street from the CBD zone or a residential zone.
B. Fences may be required along the side and/or rear property lines as a required buffer feature, depending on the proposed use and existing abutting uses and zone per Table 19.65.070(A).
C. The maximum height for fences and walls is seven feet. The Director may allow taller fences, provided they are necessary for functional and security purposes and the design of the fences meets the purposes of the standards. (Ord. 3040 § 2 (Att. A), 2019)